1996 nissan maxima
It will take two people, one to push clutch peddel, and one to open bleeder, same as bleeding breaks, the person pushing peddel pumps peddel a few times and the last time holds to floor, other person opens bleeder to let air out, and then closes bleeder while peedel is still depressed, do this process over and over untill you get clutch or a steady stream of fluid with no air , while keeping an eye on fluid level in resavor.
It can also be done with 1 person. Replace the bleeder with a speedbleeder, pump away, and watch the fluid level.
SOURCE: How do I bleed the master clutch cylinder
Drain or bleed? The bleeder nipple is on the slave cylinder. Fill master cylinder,leave the cap loose, open the bleed nipple at the slave cylinder,and let gravity do the rest. whe vo more aie bibbles come out and it drips steady. Close the bleeder, top of the master cylinder and you are done.
554 views
Usually answered in minutes!
×