I has BRAKE & ABS light on in my 2003 Honda Pilot. Dealer diagnose it as "ABS control Module" need replacement (Cost $1400). I ordered the part from used car parts dealer and have it installed now the DTC code reads "FAIL SAFE RELAY" Where is this relay located and what I need to do to reset the "BRAKE" and "ABS" light which is still ON?
SOURCE: ABS Light is on all the time.
the abs module could be the problem but they also had common problem with rear speed sensor harness breaking at the connector by the front of the left rear wheel
SOURCE: 2006 Honda Pilot oil change light
pre the trip button and hold it down then turn the key to the on position...should work for you
SOURCE: My dealer recommended that I have the timing belt
TIMING BELT REPLACEMENT TIME IS AT 105000.IF TIMING BELT NEED CHANGING I WOULD ALSO CHANGE WATER PUMP BECAUSE IT HAS TO BE REMOVED TO GET TO TIMING BELT.TIMING BELT HAS TO BE REPLACED.IT WOULD BE CHEAPER TO PAY $775.00 THEN TO PAY $3000.00 OR $4000.00 FOR A NEW ENGINE THATS INCLUDING LABOR IN ALL.
SOURCE: Location of A/C compressor clutch relay for 2004 Honda CRV
its under the hood in the box near the battery on the drivers side. I believe its the tall black one, but I could be wrong about which one since there are a number of them-- I know its in that box near the battery though.
223 views
Usually answered in minutes!
×