SOURCE: How do I reset the oil change light in a 2008 Chevy Suburban
Try this: turn the key to the RUN position (don't start it), press the
accelerator to the floor 3 times within 5 seconds. The oil life light
should flash twice, indicating that it's been reset.
If you have
steering wheel controls, you can navigate to where it says Oil Life and
then hold the arrow down, that should also reset the oil life.
SOURCE: Reset my engine oil low in 2007 chevy impala
it will say in your owners manual but i believe you turn your ignition key to the run position not the start. and pump the gas pedal 3 times with in 5 seconds
SOURCE: 2004 chevy 3500 express passenger van transmission
if ur replacing it remove front grill disconnect both lines and carefully remove retaining clips from radiator if replacement is original eguipt mount & reconnect --if its a universal follow instructions usually cut off fittings and use clamps and hose to hook up
SOURCE: how do i reset the
press the gas pedal on the floor and turn the key on then real fast mash the gas peal 3 times fast on the trird time hold it on the floor tell the oil light resets it self count to ten. should work just fine.
130 views
Usually answered in minutes!
×