How to Replace a radiator support panel in vy SS commodore
you have drill out all the sport welds if you start on a front clip from a wreck find all the spot welds, grind all the welds without cutting into the front you need, making note where the welds are, using a center punch mark the center of welds on your front, using a drill the same size as the spot weld, drill them all out, there may be 100+ of them carefully measuring where it has to go back to, draw a diagram, measure again, then check your measurements again. remove the panel, set new frame in place, weld in the spots where you drilled measure again. Or take it to a panel beater because you havn't even looked at paint yet
×