My 95 jgcl will start run less than 2 seconds then i am assumeing that the asd shuts it down or maybe the tps is bad. i had to reset the antitheft system (factory installed) when i got the jeep it ran great about a month then it was giving me the same no start issue . i jiggled around the tps and other sensors reset alarm it ran again another month died again now i am stuck again i am currently going through wireing trying to bypass asd can anyone guide me in the right direction or tell me how to bypass theft system
The Chrysler factory VTSS vehicle theft security system will do just that. Try unlocking the vehicle with the remote or one of the three VTSS switches, both front doors or the rear hatch. Sometimes the door switches get damaged front "Slim Jimming" the lock. The rear hatch switch is usually intact. The VTSS should "Arm" after a battery disconnect or dead battery. The VTSS cannot be bypassed once it is activated. If you put a previously installed ECM that was on a vehicle with VTSS, on a vehicle without VTSS the vehicle will not run.
727 views
Usually answered in minutes!
×