How do i change the oil pan gasket in a 94 jeep wrangler, 4 cylinder, automatic?
On most, you need to remove all bolts around the perimeter of the pan, (You may want to remove starter to get to fasteners there) then slide a paint scraper between the pan and block to break the seal. Generally there is enough room to get the pan out. If you need a bit more room, support the transmission with a jack (use a piece of plywood on top to avoid bending anything) remove both engine mount through bolts and raise engine slightly (not too much or you will break something)
To install:
Do not hammer the damper into place as damage may result to the damper or engine.
363 views
Usually answered in minutes!
×