Heater core how do i remove the heater case from my 2000 dodge durango

Here's a link on heater core removal, Repair Guides Heating And Air Conditioning Heater Core AutoZone com

the thermostat that regulates the water temperature is bad. it is in the open position keeping the water from heating

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core. Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing

• The heater housing is usually under the dash and must be removed to gain access to the heater core.
• Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.

The heater housing is disassembled to get to the heater core. Heater Core

• Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
• Remove the heater coolant hoses.
• Remove the cable and/or vacuum control lines (if equipped).
• Remove the heater core securing brackets and/or clamps.
• Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
• To reinstall the heater core, reverse the removal steps.

When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

it sounds like your haeter core has sprung a leak. you can by-pass it by removing your heater hoses and conecting them together with a splice pipe till you can replace the heater core, but you will need to do so the by pass or heater core replacement soon or your car will start to overheat.

You will have to remove console, and all the venting and cover to heater core. Then go underneath the vehicle and disconnect both coolant hoses. Then remove heater core. You can go to autozone.com and register for full free online repair manual for your durango with everything you could need.

It's a big job. Drain the coolant down, recover the freon in the ac system and disconnect the lines and heater hoses. Lower the steering column, remove the instrument panel assembly, remove the heater housing. Split the case halves on the housing and there you are. Usually around 500 to 700 dollars at a dealership.

You will find the instructions here and unfortunately it looks like you will have to discharge the a/c.......sorry :(
hope you find this helpful and thanks for choosing FIX YA!

pop hood see heater core hoses in fire wall heater core located opposite side in cab on vehicle!