The hazard lights do not work. the switch is broken and has to be pressed with a screw driver. When the switch is activated the dash turn signal lights do not light up and the exterior lights do not work. When the switch is not depressed the running lights, brake lights and turn signals work except the left rear blinker is intermittant but i believe that is due to a malfunctioning muli-function switch due to the fact i can make it work by gently pulling on the switch. Thanks for your help
SOURCE: right signal and brake light
Looks like the problem is in the turn signal switch. This is a common problem. When the turn signal switch goes bad it will cause problems as mentioned above by you. Replace the turn signal mechanism.
SOURCE: 1999 ford crown vic dash light running light problem.
Check all the bulbs at tail end for parking and brakes, test grounds and harness for trailer. Check fuses. clean batery terminals, Re instal head light swich properly and make sure all wires conect.
Vitally
Testimonial: "thank you for quick response will try all of your suggestions will re post if no luck."
514 views
Usually answered in minutes!
https://s14.postimg.org/w51gbala9/15_A.j...
Click on the link, check 15 amp fuse.
Sounds like you need to replace switch?
×