Previous owner cut out factory stereo wiring. now have issues with courtesy lights. need wiring diagram for truck.
i had this problem to, do not hook the ground wire from truck to your radio. use the braided wire that hooked to your old factory radio by inserting a bolt into the braided wire and ground from your new radio.
then check fuses one more time and you are good to go.I didnt think this would work but it did..
SOURCE: need wire diagram to hook up trailer lights, truck not factory equipped w/harness,
I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.
SOURCE: wiring diagram from truck to trailer
Get a tester light the type with an alligator clip and a sharp point.
Check each wire for your brake lights,blinkers etc.
i.e. With the blinker light on find the correct wire and splice into it with the corresponding light on the trailer. ( DO NOT CUT THE TRUCKS WIRE)
Remove the covering and twist the plug wires around it and tape or shrink wrap if you can.
Hope this helps
SOURCE: need help with the wiring diagram for my 92 Dakota, has not brake lights or blinkers
www.wiring-diagram.com
You can get any wiring diagram for any vehicle. It will cost about $12 and it's well worth it. It will give you the complete diagram bumper to bumper.
SOURCE: how to fix gauges on 1997 dodge dakota truck
how do i remove the gauge face on a 2000 dakota
184 views
Usually answered in minutes!
×