Convertible top coming away from glass window

You need to cut a small piece of the plastic liner at the bottom. cut about 1/4 inch of just the plastic. not the liner. If you score the plastic half way through then you can snap it off. I put a little glue on the fabric so it does not unravel. THen you need to use a plastic hammer and a piece of wood or plastic and snap the liner back in. It fits in a channel and needs to be snapped in and work your way around until it is all snapped in.

araldite ,epoxy resin two pack type adhesive

Your glass was originally heat sealed to the top material. When it begins delaminating, your only recourse is to replace the top because your new top will come with a new window. Any sticky gooey repairs are very temporary at best

Good luck, Karl at aoksales.com

Good Evening, there are several ways to go about it. First off your local upholstery shops can assist you in some way with that without changing the whole top with their assistance. Some glass places can prime the glass and you can get some fuzor to glue it back down. You have a couple options to explore now, hope this helps.
Thanks,
Joey

there is actually a tsb on this and the dealership should handle this concern

This is a common problem with many cars. It is delamination. If the window is loose in spots, it can often be repaired with urethane adhesive like glass shops use for windshields. If the glass is more than 30% delaminated, chances of fixing it are slim. With the glass all the way out, you need a new top. Karl at topgunwon.com

i would take this to a window and glass place. this way you get a warranty

Look for a junkyard around that sells the window or buy one online for dirt cheap and then put it in yourself. It is not that hard just time consuming.

Here is an idea!

If its a small seperation, it can be glued. If most if it has come undone, you're gonna have to get a new top. I'm going through that process now, looking at about 600-650 for the top, and another 700 to put it in. Thinking about doing it myself but looked it over and it seems kinda rough.