SOURCE: 2005 Lincoln Ls 3rd Brake Light Wiring
The best way to wire a third brake light is to run the wire directly from the brake light switch on the side of the steering colum to the light. You will need a test light to find out what wire lights up when you push the brake pedal. Then you can splice into it when you run your wire to the rear light.
SOURCE: can not find wiring harness for '95 lincoln towncar
If you cant find the wiring harness i'd suggest you snip the adapter of and join the wires up *Correctly of course*
Modern CD players normally have a sticker or information on which wire does what on the CD player.
You just have to work out the ones on the Lincoln then.
SOURCE: brake lighs stop working
Does the 3rd brake lamp illuminate? If so then your problem is multifunction switch.If it doesn't do the following checks.
Check for power to and thru the brake lamp switch itself.If you do not have power to the switch check fuse no. 10(20 amp) in the interior fuse panel.If you have power to the switch then depress brake pedal and make sure you have power thru the switch.If this is ok the check Fuse 22(20amp) with brake applied..
SOURCE: Brake light dont work
check the fuse for the brake lights. The brake lights and siganl lights use the same bulb filament. The parking and running lights use a dimmer filament in the bulb. There are 2 filaments.
Your brake lights work through the multifunction switch which operates the signal lights. If the signal lights work, you may have a bad brake lamp switch which is on your brake pedal arm.
Let us know what you find.
1,280 views
Usually answered in minutes!
×