Removal of gear shift knob from crossfire 2004

SOURCE: removal of gear shift knob

There are two types of shift knobs. One that unscrews and one that the lower trim of the shift knob separates from the knob using a trim stick. After separating the lower trim from the knob pull upward to release the knob from the shift lever. If a new shifter assembly is being installed, unscrew the original shift knob or separate the lower trim from the knob and pull up to remove the knob from the shift lever. Screw the knob onto the new shifter assembly's lever no more than 14 turns or install the lower trim onto the shift lever then push the knob onto the shift lever and install the lower trim piece onto the shift knob.

SOURCE: 1998 camaro, v6 automatic, gear shift knob ??

If it is neither suggestion by bunnydawg, try looking on the back of the shifter for a metal staple that needs to be pulled out.

SOURCE: Removing Factory Gear Shift Knob for 2001 Jetta

On my 2000 jetta glx, I had to replace both the shift knob and boot as one. It is built as one unit. You have to pull the boot up over the shift knob, break/bend a clip to "unlock" the shift knob then pull up. I hope the new knob you got has the boot built in and comes with a new clip.

SOURCE: remove center console

look for a set screw at he bottom of the shift lever, unscrew and pull up

SOURCE: gear shift knob

Usually there is a small metal clip at the bottom front of the shift knob (looks like a staple.) Just pull it out and pull the knob straight up.