SOURCE: Brake lights only show on center 3rd high stop tail lamp
Yes, the flasher does interrupt the brake signal. you do know that this is a push on, push off switch. Some try to pull this switch to turn off flashers, but, it has to be pushed again to turn off.
SOURCE: 2004 GMC Yukon xl......If I put left turn signal
That vehicle has all three switches attached to the same module. Spray a little wd-40 into the flasher switch. Sometimes the slide on the flasher switch gets a little sticky and won't allow the turn signal to work independently. If that isn't the case, there is a repair kit for that available on ebay. the module of course costs around three hundred to replace but could possibly be found at a boneyard for much less. Also, check ebay for that module. Hopefully the WD-40 will fix it. Good luck.
SOURCE: replace turn signal flasher 1999 yukon
There is not such flasher module available, this uses an electronic flasher. The old ones where a mechanical heated metal design and louder ones where made.
68 views
Usually answered in minutes!
×