Question about Saturn SL

Open Question

2000 Saturn SL pressure plate torque value - SL Saturn Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 56 Answers

SOURCE: I need the bolt torque specs

go to the local auto parts store and purchase a Chiltons Repair Manual on your car, it has all the torque specs listed for this. Or you could try the library and see if there is one there for your car and just look it up for free..... just write it all down.

Posted on Oct 13, 2008

Ad

Anonymous

  • 341 Answers

SOURCE: torque settings for pressure plate and fly wheel

the flywheel is 50 -60 ft.lbs....pressure plate is 15- 25 ft. lbs..

Posted on Nov 22, 2008

USfalcon

anwar alkhaldi

  • 197 Answers

SOURCE: 1998 Saturn SL not sparking and not starting

onepx.gif 1. Test the AC voltage output from the Crankshaft Position (CKP) sensor while cranking at a normal speed. It should produce at least 250 millivolts.

2. Retest the voltage at the Powertrain Control Module (PCM) on the Yellow wire in terminal D13 and the Purple wire in terminal D14.

let me know please thanx i hope it fix

Posted on Mar 17, 2009

Anonymous

  • 13 Answers

SOURCE: car wont start

Try checking the battery, it could be dead or almost dead. If it is, you might want to check and see if the alternater is out. If that dosn't work or the battery is fine, then try replacing the starter.

Posted on Mar 22, 2009

michael billington

  • 334 Answers

SOURCE: trying to find a throttle body for saturn 2000 sl sedan

call k and k auto salvage they will be able to help you the phone is 207 368 2264 ok

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pressure plate torque 1997 saturn sl 1.9 and flywheel torque


Wiring, schematic, electrical diagrams,
fuse diag, error codes, torque settings etc are basic contents of these online books they have here on this website www.reliable-store.com I have attached. Must check it out

Mar 01, 2018 | Saturn Cars & Trucks

1 Answer

1997 Saturn SL-1 idles fast


The ECM maybe stuck, disconnect the battery and wait 5 mins then reconnect.

Other things that normal cause high rpm at idle:
  • PCV hose to throttle body has a leak
  • vacuum line to brake has a leak.
  • the throttle plate maybe dirty and is open partly
  • the IAC is bad. Which is on the throttle body.
  • the throttle plate sensor is bad, just unplug it and see if the rpm goes down. If it does, replace the sensor.
  • the egr value maybe stuck
  • bad front o2 sensor
  • bad coolant senor. You should have this replace since the original sensor where plastic tip and crack. The new ones has a brass tip. the transmission and air( IAT) have the same sensor part.

May 11, 2014 | Saturn SL Cars & Trucks

1 Answer

Pressure plate torque spec


Can't imagine that is anywhere near enough unless it's an 1/8 inch bolt!! If it's 3/8 or so I would think 35 with locktite.

Apr 07, 2014 | Saturn Vue Cars & Trucks

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

1 Answer

How to pressure test the radiator in a 2000 saturn sl1


You need this tool to pressure test the cooling system.

Sep 18, 2012 | 2000 Saturn SL

1 Answer

Where torque convertor clutch location on 197 saturn


Either in the torque converter or the transmission.

Jul 03, 2012 | 2000 Saturn SL

1 Answer

Trying to find a throttle body for saturn 2000 sl sedan


call k and k auto salvage they will be able to help you the phone is 207 368 2264 ok

Apr 05, 2009 | 2000 Saturn SL

1 Answer

Car wont start


Try checking the battery, it could be dead or almost dead. If it is, you might want to check and see if the alternater is out. If that dosn't work or the battery is fine, then try replacing the starter.

Mar 22, 2009 | 1998 Saturn SL

1 Answer

94 Saturn Twin Cam Valve Adjustment


Valve slash and clearance adjustments should only be performed by certified mechanics and is not a job for the garage or novice hands on type.
If you still decide to proceed, I suggest you get your hands on a maintenance manual which will list the procedure step by step, including proper torque values.

Mar 05, 2009 | 1999 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...