At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My turn signal also doesn't automatically shut off.
I would appreciate it if anyone could give me the steps it takes to fix the problem.
Thanks -
DaveMy turn signal also doesn't automatically shut off.
I would appreciate it if anyone could give me the steps it takes to fix the problem.
Thanks -
Dave
AnonymousMar 18, 2014
lights are on but not on dashboard and its not clickinglights are on but not on dashboard and its not clicking
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Wire is shorted somewhere in the turn signal circuit. Start at the bulb and trace backwards looking for a break in a wire or a pinched wire. These problems are difficult to find and take a lot of time....
Good Luck.
Also. DO NOT TRY A FUSE LARGER THAN 10 AMP unless you want a toasted car...
It's connected to the turn signal stem, inside the steering column. It comes with a new turn signal stalk, so the steering wheel has to come off. It's easy, make sure you disconnect the battery, so the airbag will be disarmed. Any shade tree mechanic can do this in about an hour.
If you can hear a faint click sound as the steering wheel is returned to the centered position, then my solution may apply. This type of problem was found on a 1997 Dodge Neon. There are two issues on this car. There are a pair of reset tabs that rotate with the steering column. They can move out of position because they are part of an assembly that latches into position. When the assembly is snapped back into position this may resolve the problem. In my case it allowed the turn signal to reset in one direction. Next, I cut a short
0.3" section of 0.25" I.D. aluminum tubing and notched and shaped it to fit over the cam on the end of the reset lever on the turn signal assembly. I crimped it so the piece could not fall off. This made the reset lever cam slightly wider and allowed it to be pushed a little further by the reset tabs. This has worked very well.
Vehicles:
Make/Models:
Model/Build Years:
SATURN/LS
2000
Defect:
VEHICLEDESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITHREQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, ANDASSOCIATED EQUIPMENT." BECAUSE OF A PROBLEM IN THE HAZARD WARNINGSWITCH ASSEMBLY, THE TURN SIGNAL LAMPS MAY NOT WORK OR MAY WORKINTERMITTENTLY WHEN THE DRIVER USES THE TURN SIGNAL LEVER OR HAZARDWARNING SWITCH. IF THE VEHICLE TURN SIGNAL INDICATORS ARE NOT FLASHING,THEN THE TURN SIGNAL LAMPS MAY NOT BE FLASHING.
Component Affected:
EXTERIOR LIGHTING:TURN SIGNAL:SWITCH
Corrective Action:
OTHER DRIVERS MAY NOT BE ALERTED THAT THE VEHICLE IS TURNING AND A CRASH COULD OCCUR.
Consequence:
DEALERS WILL REPLACE THE HAZARD WARNING SWITCH ASSEMBLY.
Mfr. Campaign #:
99045/00-C-03
Mfr. Involved:
GENERAL MOTORS CORP.
# Vehicles Affected:
1395
File Date:
07/29/1999
The vehicle you are working on may or may not be affected by this recall. Contact the vehicle manufacturer for clarification. hope this solves your problem.THANK YOU
My turn signal also doesn't automatically shut off.
I would appreciate it if anyone could give me the steps it takes to fix the problem.
Thanks -
Dave
lights are on but not on dashboard and its not clicking
×