RUns barely getting Codes P301, P302, P303 What is common to all 3 cyclinders that causes this
SOURCE: 1997 Ford Explorer
Ok you need to correct the mechanical issue and then deal with the codes, they are a result of the engine problem, not the cause of it.
SOURCE: 2002Ford taurus 98,600mi engine light is on
Did you ever do a tune up? If not you need to change the spark plugs pvc if you have one,some do and some dont anymore.also change the spark plug wires.This is where you have to start,even if your car was in a shop.Then you go from there if this does not fix your problem take to a good repair shop.
SOURCE: I have a 2003 Ford F250 with a 7.3l power stroke.
The code 0344 means the camshaft position sensor is acting up and the code1670 is saying the feedback loop from the part is not being detected.
This can very easily cause the cutout you are describing. You might look for a sensor in the camshaft area and unplug and clean the connection.
Testimonial: "Thanks for quick response. If Cam Shaft Sensor is bad, I guess it would not continue running..I will clean connections as recommended..Thanks Again"
SOURCE: TOO LEAN CODES
yes very very common code for these motors i get them all the time. now the first thing i do is listen to the pcv valve for noise if it is rattling this is the problem and is the most common of all. another thing is the intakes leak from cracks in them but the only way to find it is with a smoke machine. now the one other thing i have seen before is debre like a leaf in the mass air flow sensor but you have replaced it so most likely no that.
do your self a favor and change the pcv valve it only cost under 5 dollars. if this is not it you will need to find the leak in and around the intake or a vacuum hose.
because you have two lean banks this mean if it is a leak then it has to be in common with both banks and that is the vacuum line system intake etc...
let mew know if you have any more question. good luck man
SOURCE: 2008 Ford F250 6.4 turbo diesel, have 3 DTC codes
SUPERSHIPS PROGRAMMER GIVEN ME LOTS OF CODES AND WILL NOT ALLOW MY TRUCK TO STARTiT TURNS OVER BUT CHOKES ITSELF OFF ONE CODE IS P2291
414 views
Usually answered in minutes!
×