SOURCE: 1995 Jeep Grand Cherokee Orvis 5.2L V8 will crank but not start.
Fuel delivery is influenced by engine temperature sensor. (sometimes a seperate unit from gauge sensor). Since you did not mention any performance problems after starting or on hot re-starts, that's where I'd look first!
SOURCE: 1995 Grand Jeep Cherokee
The lower speeds are controlled by a resistor block. That's what needs to be replace. It's usually located next to the blower. It will have electrical wires connected to it. High speed bypasses the block so it alway works.
If you want to replace it then;
) Disconnect the battery negative terminal if the vehicle have air bags. Wait 2 minutes for system to discharge.
) Remove the kick block on the passenger side.
)Remve the glove box
) Remove the bolts holding the blower motor resistor. Push the red lock up and press down on the click
) Pull the block out.
) Install new block and reverse steps above.
SOURCE: my 1996 jeep grand cherokee doesnt start half the time
Sounds like a poor connection somewhere...Best time to check is when it's in no-start condition...When running, obviously whatever isn't working is (temporarily). Once you identify the system (fuel, spark etc) that's not working, check all wires and connectors for good contact and continuity.
SOURCE: security light flashing wont let you start jeep
the alarm seems to be activated. press the button and turn the key.
SOURCE: electronic key on 2008 jeep
electronic key on 2008 jeep cherokee says key damaged or key not programmed. car won't start. some things work but radio won't come on. etc..
761 views
Usually answered in minutes!
×