1997 Dodge Dakota Logo
Anonymous Posted on Jan 31, 2009

2000 dakota 4.7 v-8 codes p0300 p0303 p0304 p0307

Loss of power won't go over 3000 rpm in P R N D. changed plugs, air filter, fuel press good, no intake manifold leak, does have exaust manifold leak, just had trans. replaced. ran fine for about 3-4 days. did have p0308 that went away.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Feb 20, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Feb 18, 2009
Answers
9
Questions
1
Helped
4660
Points
11

Well the codes
p0300 multiple misfire
p0303 misfire cylinder 3
p0304 misfire cylinder 4
p0307 misfire cylinder 7

can be alot of things check cylinders for compression is what i would do first..

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

Car sputtering badly. Codes P303 n P102 show on diagnostics and have replaced both parts associated with these codes,PLUS, new fuel filter, engine still sputtering badly.

Hi,

I hope I can help with this. This could mean the engine spark plugs or plug is the issue. Also check the exhaust pipe. White smoke indicates a coolant issue. Check your coolant reservoir. Black smoke indicates a Fuel issue. Blue is an oil issue. Also, speaking of your spark plugs there very well could be a misfire.

the code P303 could be cylinder 3 misfire
P102 the mass air flow sensor which is on the air filter cover. It's an electrical part and is sensor. Please check these and let me know.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/laura_08254539050d64db

0helpful
1answer

Making noise

check the coil if coil is ok spark plug if there are ok may damage in emission valve or injectors code relate it to the problems are p0300 p0301 p0302 p0303 p0304 p0305 p0306 p0307 p0308
0helpful
2answers

2008 Cadillac CTS returning P0303 after replacing spark plug and coil pack

Error Code: P0303
Description:
Cylinder 3 - Misfire Detected
Possible Cause:
Wiring harness, igniter and fuel injector connectors.
Ignition system. (Spark plugs gaps)
Fuel injector No. 3.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression, cylinder No.3. (check valve clearance and throttle plate for excessive wear)
Engine control module (ECM).
9helpful
1answer

Codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough when idling/lexus gs 400 1998

P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........
0helpful
1answer

P0303, P0304, P0305, P0307

misfire on cyl.s 3 ,4 , 5 ,and 7
most common cause spark plug boots
and plugs.

next most common ,, intake manifold gasket
0helpful
1answer

What is the meaning of 98 Honda Civic error codes P0300 P0303 P0304? Engine will not start, does not seem to fire.

P0300 indicates that there is multiple miss fire in the ignition system. P0303 and p0304 indicates the miss fire is in cylinder #3 and #4. Replace the spark plug, and wire set, and rotor and cap if there is one. Can not remember if there are coil packs on the civic, the age thing. change the fuel filter and clean out the fuel injectors with fuel injector cleaner for the next 3 full ups. When the spark plugs are removed, inspect them for condition, if there clean or dirty with carbon build up. which would indicate how the engine is running. Keep me posted and drive safe.
0helpful
1answer

2000 dakota 4.7 v-8 codes p0300 p0303 p0304 p0307

Catalytic converters on the Dakota's were a recall issue from 1999-2003 models.
I had a 99 and a 2001 and had the same problem on both.(3 times on the 99 and once on the 01)
You should also check the speed sensor on the rear axle.
The neutral safety switch and the EGR valve.

If I were you,I would start with the Cat and EGR,then check the other stuff if you still have issues.




Please rate this a fixya
Not finding what you are looking for?

1,727 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...