Can only drive 30 mph, automatic transmission will not shift into 2nd gear. Also using more gas than usual and the check engine light came on all at the same time.
SOURCE: 2004 Jeep Wrangler - Clunking Noise when shifting out of Park
It could be lash in the differential which is normal, but it could also be a loose u-joint in the driveshaft. Check the rear driveshaft u-joints.
SOURCE: 02 jeep liberty won't shift into 3rd or 4th gear.
Ratio codes generally indicate a pressure loss & slipping which the computer reads as a gear ratio problem. Likely you need a rebuild.
SOURCE: 2002 Jeep Wrangler 4.0 When Driving the Engine Dies
Put the key in the ignition and turn it on and off (3) times without starting the jeep, leaving it in the on position count the (1) flashing indicator Light, Eg: (5) flashes, Then there will be a pause, then it may flash (3) times, this is a code #53. Keep your Eye on them and write them down. If you should miss (1) Repeat as many times as needed, Info: A #55 means there are no codes!!
SOURCE: Jeep 1992 Wrangler won't shift into gear
Not frozen, probably split shifted. Two gears at once.Is this a floor stick or column ahift. Surely not automatic, right? Ley me know and I'll tell you how to undo it
SOURCE: 2004 Jeep Wrangler automatic gear shift won't lock
The detent prawl has broken ..goto a dealer or a junk yard and get a replacement one
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c
346 views
Usually answered in minutes!
×