Wiper motor does not work on my 1994 dodge intrepid?

REMOVAL & INSTALLATION
(I made images larger at the end of instructions)
See Figures 1, 2 and 3
Fig. 1: Unbolt the wiper motor from the housing wiper motor does not work on my 1994 dodge intrepi - 0900c1528006ad4b.jpgmages/0900c1528006ad4b.jpg" alt="0900c1528006ad4b.jpg" class="h_mi" />Fig. 2: A little maneuverwiper motor does not work on my 1994 dodge intrepi - 0900c1528006ad4c.jpgto pull the motor out Fig. 3: Exploded view of the wiper motor and associated components that make up the wiper system

1. Disconnect the negative battery cable.
2. Remove the wiper arm and blade assemblies, then disconnect the in-line hose connections. Do not discard the in-line connectors.
3. Remove the rear hood seal with the cowl top plastic screen. Disconnect the washer hose in-line connectors.
4. Disconnect the motor wiring harness at the back side of the housing.
5. Remove the four wiper housing module mounting screws, then remove the housing.
6. Remove the nut and disconnect the wiper drive linkage from the motor crank.
7. Remove the three motor mounting screws. Lift the motor and mounting plate out of the housing.
8. Disconnect the motor harness grommet from the housing.

1. Assemblethe linkage to the motor. Make sure that the crank fits over the D sloton the motor shaft. Tighten the mounting nut to 90-106 inch lbs. (11-14Nm). Be sure the motor is still in the park position before assemblingto the linkage; if it is not, temporarily connect the motor to thewiring and operate the switch to park the motor before assembling thelinkage.
2. Position the wiper motor and install the retaining nuts until snug.
3. Attach the linkage drive crank to the motor crank arm.
4. Plug the wiper motor wiring back together.
5. Install the wiper motor cover.
6. Install the wiper arms and plastic cowl removed previously.
7. wiper motor does not work on my 1994 dodge intrepi - 0900c1528006ad4a.gif battery cable and check the wiper motor for proper operation.
   

I have a 2000 dodge caravan 3.0 L engine. I have a problem with the wipers. When I turn on the switch, the motor seems to be activated but the wiper arms do not move. Can anyone shed any light on what my problem may be.