Test the blower motor by jumping 12 volts to the blower motor connector, if it works you have a defective blower motor speed control resistor which is located just next to the blower motor, i recommend u replace both as the blower motor ages it draws more current and this causes the resistor fail, u should be able to buy these parts in the aftermarket, the dealer parts will be very expensive.
The blower motor is behind the glove box. Remove the glove box (3screws, 1 on the left side and 2on the bottom). Remove the glove box lower frame (4 screws). The blower motor assembly will be on the right hand side under the dash
524 views
Usually answered in minutes!
×