How do I install a new front wiper motor on my 1999 chevy venture minivan? Windshield wiper motor, Intermediate settings not working all I have is High,washer works but no motor action, arms do not park themselves when turned off I have to play around with them most of the time I just give up
Disconnect the negative battery post.
disconnect the harness from the wipper motor, using a 8mm socket, loosen the two crank arm socket screws and lock-washers until the socket releasesfrom the crank arm ball. do not remove the crank arm from the motor.
using a 10mm socket, remove the three motor retaining screws, slide the motor out of the slot in the bracket.
To install make sure the wipers are in the park position, slide the motor into the slot in the bracket. using the 10mm socket, install the three motor retaining screws and tighten to 49-80inch lbs.Using the 8mm socket tighten the two crank arm socket srews and lock washers. connect the harness to the wiper motor.connect the negative battery cable
532 views
Usually answered in minutes!
×