Programming a honda transponder key - 2007 Honda Pilot

Did some quick research for you and found this easy and very clear step by step instructions on how to program your transponder car key to your vehicle.. this works for the following models though :

Accord 2003 to 2006

Civic 1999 to 2006

Element 2003 to 2006

Odyssey 1999 to 2006

Prelude1999 to 2001

Accord SE 1997

CR-V 1998 to 2006

Insight 2000 to 2006

Pilot 2002 to 2006

now here are the steps:

1. Turn the ignition on
2. Press Lock/Unlock within 4 seconds
3. Turn ignition off and hen back on within 8 seconds
4. Repeat steps 2-3 two times
5. Press Lock/Unlock again within 4 seconds. The system should now lock and unlock the vehicle to indicate it is in programming mode.
6. In the next 10 seconds: press Lock/Unlock button allowing the doors to lock/unlock once; then press lock/unlock button of each remaining key, allowing the doors to lock/unlock once.
7. Switch ignition off and then remove the key

Civic 1996-1998

1. Turn ignition on
2. Press and hold the valet button which is situated on the radio within 5 seconds.
3. System should now lock and unlock the vehicle indicating it is in the programming mode
4. Within 5 seconds turn ignition OFF and press Lock/unlock on the remote fob to be programmed
5. Within the next 10 seconds, press Lock or Unlock of any remaining keys, allowing the doors o lock or unlock once.
6. Release valet key
7. Switch ignition off and then remove the key

Radio remotes 2 and 3 button types

1. Switch ignition on and repeat for 3 times.
2. Press he lock button, switch the ignition off and back on and then press lock button again.
3. System should now lock or unlock
4. Press the lock button of all remotes to be coded. The car should acknowledge this by locking/unlocking each time
5. Switch ignition off to exit the programming mode.