HOW TO SET TIMING BELT MARKS ON A 1999 VOLVO S80 T6 2.8L TURBO

SOURCE: How to replace timing belt for volvo xc90 2.5 turbo?

Bring to dealer

SOURCE: 1999 Volvo S80 2.8 Turbo Timing Over advanced

Either replace the cam position sensor or adjust cam position if incorrect.

SOURCE: i changed the timing belt on a 98 volvo s70 turbo

You could be 180 degrees out of synch the crank pully goes around twice when the Cam shaft pully goes once.

SOURCE: 2000 volvo s80 turbo does it have a timing belt or chain and when

timing belt replacement is 168,000 km

Greg Bernett

• 2993 Answers
• Posted on Jul 26, 2009

SOURCE: 1999 kia sportage timing marks

Crankshaft match marks


Align marks on timing belt pulley and pump body.

Camshaft pulley alignment marks

1. Align marks on camshaft pulleys with alignment marks on seal plate.
2. Install timing belt. NOTE: No looseness should exist on the tension side and at the camshaft pulleys.
   
3. Loosen tensioner lock bolt.
4. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.
5. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm).
6. Apply a force of 22 lbs to timing belt between camshaft sprockets.
7. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm)
8. NOTE: Replace tensioner spring if timing belt deflection is excessive.

1. Install lower timing belt cover.
2. Install upper timing belt cover.
3. Install power steering drive belt and adjust belt tension.
4. Install fan pulley.
5. Install generator drive belt and adjust belt tension.
6. Install A/C drive belt and adjust belt tension.
7. Install splash guard.
8. Install fan and fan shroud.
9. Install 4 fan bolts. Tighten to 24 ft lb (33 Nm).
10. Install fan shroud mounting bolts.
11. Install fresh air duct.
12. Connect hose to resonance chamber.
13. Connect battery negative cable.