SOURCE: 1984 c4 corvette/ trans problem
both modulator and needs serviced when servicing ck for debris in pan
SOURCE: Low Oil Pressure on 1992 Chevy 1500 Pickup Truck
1992 silverado pickup has a problem with the oil pressure Gage on the dash board fluctuate when i put break on or accelerate the gas
SOURCE: high idle air intake gasket
HI!!! first try this get brake cleaner.go little bylittle spraing all around the intake if run normal and changes the rpm.you have intake leak' o change idle sped sensor
SOURCE: S10 has very high idle when cold and sticks to the gas when warm
you need to replace the throtle body controll sensor. Also you may want to make sure all your linkage from the pedal to the throtle body is cleaned and lubed correctly. While playing in this direct area. Your throtle body is only 4 bolts away. Why not get some carb cleaner and get to know your truck just a litle more.
If this is a carborator, then you need to turn my warmup idle down. there are 2 sets of idles on carborators. the one to warm up the engine, automatic choke or pin settings. Get a Chilton, find out which idles pin is for what. and play a litle bit.
I think you have a throtle body so I would also check the automatic air intake sensor. It could be going bad. Check your filter and make sure its clean.
hope all this helps.
tepfy
SOURCE: idle out of control.
check all your vacuum hoses and the throttle body itself for a vacuum leaks if the hoses replace as nessasary if to check for throttle body get can of carb cleaner and spray around base of throttle body and sides not in it if idle raises you have a vacuum leak goto a good parts store and ask for a rebuild kit don't goto auto zone or advance they don't carry them
1,528 views
Usually answered in minutes!
×