At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I keep getting a check engine lite ,on and off but solid for a couple days then off for a day.Runs great ,no loss of power or fluids. My friend pulled code p0112. Thanks
Hello;
Check your inlet air temp snsor for tolerance. It is showing low input. It is usually located in the air inlet tube between the air filter and the throttle body.
RPM Northwest
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Code 205 is for a problem with the injector on cylinder 5 and code 305 is for a miss or loss of power on the same cylinder. I would check that injector next.
I have a similar problem - every once in a while all of my dash lights flash on like the car is trying to conk out/stall (I have a 2006 Jeep Grand Cherokee) - the car has no loss of power and runs fine, just all of the dashboard lights and warnings come on like its going to stall. Happens on dry days, wet days, cold days, warm days - at least 3 times a month. trouble is, because its intermittent no one can find the problem.
I would hope, but for some reason believe you continue
to drive a vehicle with a System Malfunction Light lite
on your dash,when you should be checking for codes
within a couple of days or stop using it
Then have it diagnosed & repaired within a week, if
possible,so as not to do any possible damage to the
vehicle.
"Check Lights on dash"
Check for codes-- immediately
Diagnose -- couple of days
Repair - week or so
Those three steps have been in place since
1980,that is 31 years
(Why do we get a hundred questions a day on this site alone)
Hi i took the jeep into the dealers they said the fault was a intercooler hose, have to wait for part could this have caused all that smoke vehicle still there so no diagnostic sheet yet to see the code
is this a 6cyl?
have you had the fuel pressure checked?
have you had a combustion chamber cleaning done?
have codes been read?
coolant sensor and air temp sensor checked?
I'm having same problem on my 2000 model rodeo 4wd 3.2L V6. Other day check engine light came on. I checked engine bay nothing abnormal, or power loss. Next day light was gone. 2 days later driving, a sudden loss of power and light came up. After idling for a couple of minutes, drove off with light still on but all power back. 1 hour later of faultless driving loss of power for a minute or so. Engine temp normal. Had break for 1/2 hour and set off for last hour of journey without fault except check engine light still on. Following dayon startup light went out???
Seeking help from experts.
×