Very little oil in the spark plug tubes. like next to none. It is running rich and soaking the plugs.
SOURCE: my 2000 isuzu rodeo v6 stalls when stopped, or
egr was a good point to check know check the tps sensor or the map if it has one
SOURCE: 1992 Isuzu Rodeo Distributor wires 3.1L engine
Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.
The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -
If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.
I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.
Thanks for using Fixya.
SOURCE: location of spark plugs
Underneath coil packs. Be careful not to break the boot going to plug, they come with the coil $$$
169 views
Usually answered in minutes!
×