1996 Acura SLX Logo
Posted on Nov 28, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1999 acura slx alarm

The alarm starts a fast beep a few seconds after the key is removed from the ignition, Also, the doors will lock after a few moments after removing the key, but not opening the door. Unlocking the door via switch or pulling up on the lock, the alarm will go off (as expected from the alarm's primary function). Only way to turn it off is to leave the key in the ignition and removing the negative terminal from the battery. Key fob does not function to unlock, lock, or turn off the alarm when it is acting up.

Answer This Question

1 Answer

raj somaiya

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Acura Master 5,370 Answers
  • Posted on Nov 28, 2012
raj somaiya
Acura Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: Nov 12, 2010
Answers
5370
Questions
0
Helped
3570353
Points
14579

CAR ALARM ISSUES


It can be any of the car doors not got properly locked or the door is locked but the switch is not sensing the door locked. Open and close each door again properly.

Or else its problem with any of switch wiring getting in contact with alarm wiring causing it to happen.

And last thing alarm connections need to be inspected. It's getting short somewhere in between.


There are few help links with solutions, to troubleshoot these types of problems. I suggest going through these links.


Click the link below: ------

Volvo car alarm keeps going off for no reason

http://technoanswers.blogspot.in/2012/07/volvo-car-alarm-keeps-going-off-for-no.html

------------------

Alarm keeps going OFF

http://technoanswers.blogspot.in/2012/07/alarm-keeps-going-off.html

--------------

2009 Toyota Camry: Hood Switch causing Alarm to go OFF?

http://whatisbyme.blogspot.in/2012/04/2009-toyota-camry-hood-switch-causing.html

----------------

Ford Pickup Alarm will not disengage?

http://technoanswers.blogspot.com/2012/01/ford-pickup-alarm-will-not-disengage.html

------------

Mitsubishi Diamante: Factory Security Alarm will not go Off

http://www.howtorepairguide.com/2012/11/mitsubishi-diamante-factory-security.html

------------

Toyota Avalon Factory Alarm will go off?

http://repairhelpcenter.blogspot.com/2012/01/toyota-avalon-factory-alarm-will-go-off.html

----------

Chevrolet Tahoe Hood open warning on dash and alarm sounds?

http://schematicsdiagram.blogspot.com/2011/12/chevrolet-tahoe-hood-open-warning-on.html

-----------

These details will help.

Thanks.

5 Related Answers

Anonymous

  • 21 Answers
  • Posted on Aug 23, 2008

SOURCE: Acura RL 2005 Smart Key problem

Does the car lock open with the switch on the door?  If it does not, it is not the key.  

Ad

Anonymous

  • 2 Answers
  • Posted on Feb 23, 2009

SOURCE: 93 acura vigor will not start or turnover

You might need to replace your starter.

Anonymous

  • 163 Answers
  • Posted on Jun 04, 2009

SOURCE: alarm problem on 97 acura tl - now car wont start

try turning the key on then taking the +side off then turn key off and reconect+

Anonymous

  • 3741 Answers
  • Posted on Jun 04, 2009

SOURCE: I was in the store

yes the starter is not getting the required pressure to start the car.as when you insert the key in ignition module the car gives command to the starter and car cranks and throw pressure to the alternater and that throws pressure with current to the sparkplugs and the spark comes and car gets started.as its the faulty wiring that gor misallighned and short circuited.as the wiring has to be checked at each point and that has to be cleared.also check out starter solenoid with starter .solenoid is located in the starter unit.
thanks.
please do rate the solution.thank you for using fixya.keep updated.

Anonymous

  • 242 Answers
  • Posted on Dec 24, 2009

SOURCE: I have a 98 Acura CL and after having the ignition

RE PROGRAME WAS DONE WRONG

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1999 Acura slx won't turn over. It works fine. Then it won't start. Then works again. Alarm also goes off when it's locked.
Security system is malfunctioning. Need to find main security box and cut power and ground wire to it.
Read full answer
Feb 20, 2015 • 1999 Acura SLX
1helpful
1answer

Hi. I have 2002 grang cherokee 2,7 T diesel. when I use my remote key all is open but no driver door.but alarm is still armed , when I open the doors alarm sounds exept driver doors . When i turn the...
try this first, make sure all doors are locked. Insert door key in drivers side door lock and turn key left for 3-5 seconds then turn to the right with a little pressure. open door. Insert key in ignition and turn to on ONLY! wait at least 30 seconds, then turn key to start allow to idle for a few minutes. If problem persists, the remote is not functioning properly. contact a locksmith for reprogramming or replacement. A lock shop will be cheaper than the dealer! Hope this helps you!
Read full answer
Dec 28, 2014 • 2002 Jeep Grand Cherokee
0helpful
3answers

The alarm in my 96 Acura TL went off and now my car will not start. Whoever had it before me tried to rebuild it and replaced the driver's side door, so putting the key in the door doesn't wor
its the drivers door latch one of the switches change the latch
Read full answer
Feb 12, 2018 • 1996 Acura TL Series
1helpful
3answers

I have a 99 Acura CL, and the FOB died. Used Key to oopen door - Alarm going off... Help
stick the key in the door (driver front) and hold to unlock
Read full answer
Nov 04, 2012 • 1999 Acura CL
2helpful
2answers

I but a new remote control of my toyota 4runner 1999 and i need i need direction on how to program the remote myself without me going to any dealer for me to save some money
Here are the instructions for programming the 99-02 4Runner Keyless Entry factory remotes:

1. Start with the following conditions: you are in the vehicle

a. Key is out of the ignition
b. Drive door is open ( all other doors are closed)
c. Driver door is unlocked (other door locks don't matter)

2. Insert the key into the ignition (don't turn it) and pull it out.

3. Perform these steps within 40 seconds:

a. Cycle the power locks 5 times. Use an even pace and try
to go relatively fast.

b. Close, then open the drivers door.

4. Perform these steps within 40 seconds:

a. Cycle the power locks 5 times (same as before).
b. Turn the ignition to ON then back to OFF.
c. Turn the ignition to ON then back to OFF.
d. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should cycle (automatically)
indicating successful entry into programming mode. Return to step 1
if the locks do not cycle at this point.

6. Perform these steps within 40 seconds:

a. Press the LOCK and UNLOCK buttons on the transmitter
simultaneously for 1 second.

b. Immediately after letting go of the lock and unlock buttons,
press the lock button by itself and hold for 2 seconds.
Within 3 seconds, the door locks should cycle ( LOCK then
UNLOCK) once-- indicating successful programming. If
the door locks don't cycle, or cycle twice. Repeat steps
6a and 6b--this remote has not been accepted.

c. Repeat steps 6a and 6b for EACH transmitter that will
operate the vehicle. Including any old transmitters.

7. Close the driver door.
Good Luck
Read full answer
Feb 28, 2011 • 1999 Toyota 4Runner
4helpful
1answer

Remote key fob won'tprogram
1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.

You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works
Read full answer
Aug 13, 2009 • 1999 Ford Escort
3helpful
1answer

Had car in shop for some body repair. Now remote key will not disarm alarm or unlock doors
It sounds like they disconnected your battery when they worked on your car....
Try this and see if it works..


1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.

You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works
Read full answer
Aug 10, 2009 • 2003 Jaguar S-Type
0helpful
1answer

2004 Olds Silhouette - electric door locks lock on their own
Most likely your alarm system needs reset. When you use the button to turn the alarm on and off the horn beeps and lights flash. Horn beep when switch turned on, makes sense would be in the alarm system with all you've told.
Read full answer
Jul 20, 2017 • 2004 Oldsmobile Silhouette
4helpful
2answers

2000 Toyota Sienna Minivan car alarm goes off.
1. Start with key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.
2. Insert key into ignition (Do not turn) and pull it out.
3. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Close, then open drivers door.
4. Perform these steps within 40 seconds.
 A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.
5. Within 3 seconds the power door locks should cycle automatically indicating successful entry
into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks
should cycle once indicating successful programming. If the door locks don't cycle or
cycle twice, repeat steps A and B, your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new transmitter.
7. Close drivers door.
Read full answer
Apr 25, 2009 • Chevrolet Malibu Cars & Trucks
1helpful
1answer

Hi, my name is Grace and I have a 1993 Acura Legend. Recently, my car's alarm system has been going off each time I open the door with the key or try to start it in the ignition. I'm unable to drive it...
I had the same problem Grace and even mechanics could not figure it out at first. I called 3 Acura dealers to find answers.

Mine began acting up when a door lock broke and when it broke, the alarm started going off out of the blue.

But.....I want you to know that the drainage of electrical that the alarm drained my battery. Jumpstarted battery and alarm would immediately start back up and drain it again. In the end, it fried my alternator. It was pretty crazy because the radio was going off and on by itself with the alarm blaring and no way to shut it off.

Answer is there is no way to remove the alarm system because it is all integrated in by the factory, Acura dealers told me. Your car thinks it has been broken into once the alarm goes off like that, so keeps doing it. The fix was to insert my key into the driver or passenger door lock and turn the key back and forth 3X. That resets the alarm and stops the whole problem.
Read full answer
Jul 24, 2008 • 1995 Acura Legend
Not finding what you are looking for?

View Most Popular

1996 SLX

  • Cars & Trucks

Related Question

1999 Acura slx won't turn over. It works fine. Then it won't start. Then works again. Alarm also goes off when it's locked.

  • 1999 Acura SLX

Related Topics

681 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do you change or add transmission fluid in this vehicle?

1996 Acura SLX

Transmission problems

1996 Acura SLX

There is an engine knock or loud ticking all the

1999 Acura SLX

Location of Power Window 30A Circuit Breaker

1996 Acura SLX

Check engine light came on

Acura SLX Cars & Trucks

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 1996 SLX Manual

1996 SLX

Loading...