SOURCE: Replacing a master cylinder in a 1995 Oldsmobile Cutlass Supreme.
Never Never Do this! Just buy a brand new one there is too much at risk sorry never play with brakes just for money. No rebuilt either only bran new will do.
SOURCE: 1991 oldsmobile cutlass supreme
Check for fuses/power/ground to the engine computer (or injector drive computer) whatever the case is.
Spark, fuel pump, and starter all are independant of the fuel injection computer.
Either the computer itself has gone bad, or it is not receiving power or ground, or wiring to the injectors might be bad...
SOURCE: I need to replace my
Just follow the Upper Radiator Hose to the Motor. It will attach to a Bell Housing. Remove the Hose and the Bell Housing and the Thermostat is Under the Bell Housing. Replace it the SAME Way that it Came out. Please Rate My Response! Thanks!
SOURCE: need to know the firing order of a 1995 oldsmobile
For 1995 Oldsmobile Cutlass Supreme 3.1 liter V-6 VIN "M" check...
Hope help (remember rated this).
Testimonial: "thanks for your help !!!"
SOURCE: 1991 Oldsmobile Cutlass Supreme-there's no spark.
Check the wire from the module to the crank sensor. They go bad. Usually from oil leaks. Is it saturated with oil where it goes under the engine? Also check for power and ground on the two wire plug on the drivers side of the module. It isn't the ecm or anything with it. The ignition system on the 3.1 will work with the ecm unplugged. The ignition system is a stand alone system. It sends signals to the ecm for the fuel injection.
39 views
Usually answered in minutes!
ok all the transmissioin fluid is on the ground now
×