Question about 2006 Chevrolet Cobalt

2 Answers

2006 chevrolet cobalt clutch issues

I had a stage 2 excedy racing clutch installed in my car then the master cylinder went so i had the master cylinder replaced. Now the new master cylinder wont hold pressure to dis engage the clutch so i cant engage or disengage the clutch with a new master cylinder, new slave cylinder, and pressure plate and clutch

Posted by on

  • devon zornes Nov 22, 2012

    could it be because the pressure plate is too strong for the seals in the master cylinder???

  • devon zornes Nov 23, 2012

    Just to re cap, I had a new stage 2 racing clutch put in with a new slave cylinder and master cylinder. As of now with all the new parts in it the clutch still doesnt work it does not dis engage when you put your foot on the petal and to get it to dis engage you have to pump it up and i know it sounds like theres air in the line but the utomotive shop has trid bleeding it regular an vacum bleeding it any thoughts anyone?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Chevrolet Master
  • 2,910 Answers

Make sure all the air is bleed out, check the master cylinder piston rod is the same length as the old unit.

Posted on Dec 12, 2015

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,440 Answers

Just because the master is new does not mean it isn't faulty. If you are certain you have bleed all the air from the system, I suspect you got a bad master.

Posted on Mar 04, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 chevrolet cobalt clutch issues


check clutch installment procedure could be the problem how it was installed.

Nov 21, 2012 | 2006 Chevrolet Cobalt

1 Answer

1990 camry shifting cable went out


your clutch has went out or the slave cylinder to clutch or clutch master cylinder ck master for fluid if low fill and work clutch peddle to pump up slave cylinder if master is full ck at trans to see if slave cylinder is moving if moving clutch in most likely bad and needs replaced.

Jul 15, 2012 | 1990 Toyota Camry

2 Answers

I have a 2000 Isuzu Rodeo in which the clutch pedal went to the floor & stayed there. Upon inspection, the clutch master cylinder was empty on fluid. I filled the reservoir & bleed the clutch...


It sounds as if you have 2 problems here.

The fact that the clutch pedal went to the floor and stayed there suggest a fault in the master cylinder. It may be that you need to overhaul the master cylinder.

Overhaul kits are available at less cost than a clutch master cylinder:
0results for isuzu rodeo clutch master cylinder overhaul kit

The grinding noise ... A grinding noise would be caused by either the gear not engaging properly because of the defective clutch.

Or, if it is more of a squealing noise - that may be the clutch release bearing at fault.

Are you absolutely sure that your entire clutch unit - pressure plate, driven plate and release bearing aren't worn?
116results for isuzu rodeo clutch

Mar 14, 2017 | 2000 Isuzu Rodeo

1 Answer

Replaced clutch with new clutch kit, but clutch still went out--- clutch pushes all the way down to floorboard and unable to change gears


Well, two possibilities. Clutch adjustment, or broken/bent parts. or #2

hydraulic issue (if yours is this type): prebleed master cylinder and then do not let it run dry again, or start over

Oct 01, 2010 | 1993 Jeep Wrangler

1 Answer

92 mazda miata new clutch new clutch master cylinder systems been bled several times clutch will work 4 awhile park car then try again and clutch quits working again, while driving clutch works fine 4...


Sounds like the seal in the new clutch master cylinder. I've seen that same problem in the hand brake system in small 2 and 4 seat airplanes. ( I'm and aircraft mechanic) The problem is not air in the lines so bleeding won't help. The piston seal is intermittantly failing to seal. That is whty the function can return without any apparent reason as the seal has seated itself. The only cure is to replace or rebuild the master cylinder. ( Yes, even new or rebuilt ones can have a defective or improperly installed piston seal)

Hope this helps

Aug 11, 2010 | 1997 Mazda MX-5 Miata

4 Answers

The clutch pedal is rock hard won't go in too gear checked the clutch master cylinder and thats ok, so do you know what the problem is.


Possible solution! Daewoo Lanos 98-99
Had the same problem suddenly the clutch pedal went rock hard!
The clutch was around 3 months old.
Mechanic checked - Master, Slave, Clutch Components, and inside the box, all looked okay.
Turned out the top arm of the clutch pivot rod had twisted, replaced pivot rod around AU$100.
Fixed Problem!

68f141a6-6e26-4193-91d9-bdf12856e824.jpg 8ee95b47-7be0-4e27-81a1-a4ccf7bbc122.jpg

Apr 16, 2010 | 2004 Land Rover Discovery

1 Answer

My car sat for about 5 months in the yard. Clutch and transmission are new rebuilt. Went to move the car clutch went to the floor and stayed there. What can I do?


Sounds like you either need to bleed the clutch slave cylinder, or you need to rebuild or replace the clutch master cylinder and slave cylinder. You might want to check with the shop that replaced the clutch and rebuilt the transmission. It may be covered under their warrantee.

Dec 24, 2009 | 1987 Nissan 300ZX

1 Answer

I have a e master stage 2 clutch justreplaced 6 months ago For some reason still doesn't grap right especially when first takeing off What could be the cause of this?


check to see if you have any leaks with the slave cylinder and you master cylinder, also make sure there is enogh fluid in your reservoir. Also check so see any line havnt been crimped from the last clutch installation

Oct 15, 2009 | 2000 Honda Civic

4 Answers

Engine races, clutch won't engage


Pushing the clutch pedal it to disengage the clutch, so your description is confusing. But if a car creeps when the clutch is down, you must immediately adjust the clutch, or you will ruin the transmission. However I believe you have a hydraulic clutch linkage, so the slave or master cylinder could also be bad. Peel back the rubber boots to check for leakage.

Jul 24, 2009 | 1992 Jeep Wrangler

1 Answer

Clutch 1998 toyota tocoma


Replace master cylinder

Mar 11, 2017 | 1998 Toyota Tacoma

Not finding what you are looking for?
2006 Chevrolet Cobalt Logo

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...