1991 mazda mpv BAC valve hose conecction diagrams

SOURCE: 2004 mazda MPv Where is the location of cyl. #6?

The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.

SOURCE: need diagram for timing belt for 1991 mazda

here you go buddy

http://forums.mazdaworld.org/index.php?showtopic=25269

http://www.2carpros.com/forum/1994-mazda-protege-replacing-a-blown-head-gasket-vt206242.html

http://www.2carpros.com/forum/2000-mazda-protege--my-timing-belt-broke-again,-oil-pressure-vt253721.html

http://www.blurtit.com/q298393.html

hope this helps.

thanks,

voodoo

Ned C Cook

• 3433 Answers
• Posted on Nov 12, 2009

SOURCE: 2004 Mazda MPV vacuum line from pcv valve and

You have the wrong type hose on the pcv valvle. It isn't vacuum hose.

Testimonial: "thank you you have been very helpful i understand now but the hose that is on the new pcv valve is a vacuum hose "

SOURCE: I repair the motor of my mazda mpv 2002 and it doent started

You need timimg marks, There are the internal marks for installing timing chain, you follow the marks on the crank and cam and line them up, for the Ignition timing you follow the marks on the crankshaft harmonic balance, and the marks on the timimg chain cover for top dead center ect..

SOURCE: I want to locate the starter motor on 1991 mazda

The starter motor on the MPV is located on the underside of the engine on the passenger side. If your MPV is four wheel drive it will be virtually impossible to see even if you are lying on your back under the vehicle. If you plan to take it out let me know as I have some experience with this situation.