I have a 2000 Chevrolet S10 Blazer 4x4. Feels like transmission is slipping. From a stop, put in reverse, rev up to 4,000 RPM and vehicle wouldn't move. Put in drive, rev to 4,000 rpm and doesn't move. Put vehicle in 4wd Hi, vehcile moved just fine and shifted up just fine. Put in reverse, drove in reverse just fine. Put in 2wd again, felt like slipping transmission again staying in first gear. HELP!!!!!
SOURCE: I have a 2003 chevy blazer LS, 2-door 4wd w/
try putting in nuetral and then shift into high gear . if still does not work sounds like the 4x4 acctuator is bad
SOURCE: 1999 dodge ram 4x4 transfer case
is your fluid the right grade check shift linkage loose or worn or binding manual shift or bad shift fork or moter on automatic shift
SOURCE: 95 suburban with 4l60e and manual transfer case.
sounds like a solenoid problem or trans module,
SOURCE: 1986 s10 4x4,transfer case,loose manual shifter
it may be the plastic bushings inside the transfer case they help move the arm inside if they go out they feel loose and dont move the arm far enough to lock it into 4x4 can you try pulling it farther almost untill you neutral then push back just untill it is back in 4 high see if it stays hope this helps
This is all I've got.Hope this helps?
217 views
Usually answered in minutes!
×