The check engine light is on and I have a code reader but can't find the port to attach it!
Locate the OBD port in the driver-side foot well of the 2000 VW Jetta. The OBD port is to the left of the fuse panel. There is only one port large enough to accept the pinned connector of the OBD scan tool.
SOURCE: looking for the OBD plug for my 04 miata
It is Supposed to Be on the Left of the Sterring Wheel Under the Dash Panel. Really hard to see though. Please Rate My Response! Thanks!
SOURCE: Check engine light came on
THERE IS A VALVE ON THE RIGHT SIDE OF THE INTAKE MANIFOLD THAT OPEN THE RUNNER.IT HAS A VACUUM LINE TO IT.FOR IT TO BE STUCK OPEN EITHER THE SOLENOID IS BAD,THE VACUUM LINE IS BAD OR THE RUNNER IS GUMMED UP WITH CARBON AND STUCK OPEN
SOURCE: 1997 mazda 626 Over Drive off light flashes and
OBDll 1744 says torque pressure control system mechanically stuck in off position.
SOURCE: obd tester code reader
Should be located under the drivers side dash,under steering column area.
707 views
Usually answered in minutes!
×