Question about 2005 Hyundai Tucson 2.0
Car won't start. It turns over and lights all working, now check engine light is on Was going through rain puddles night before but ran fine, came home parked it and wouldn't start the next day. Does not seem to be getting spark. Fuses look ok Please help.. need car for work.
It is probably water has gotten into one of the sensors and needs be disconnected and dried out. the only way to distinguish which sensor is to have a tech connect a diagnostic meter to the vehicle.
Posted on Feb 04, 2018
I am having the exact same problem with my 2001 Hyundai Elantra. I was told that the engine code that comes up when the sensor is on is called "Absolute Pressure In The Manifold". I was told by a "Hyundai Specialist" that when that code comes up it usually means that the seal on the manifold is Fuct. When my mechanic checked that out for me he had noticed that my manifold had 4 cracks in it(can varify cause he showed me). He replaced the manifold and gasket. The car ran fine for about 2-3 days and since then the problem has since come back and my check engine light will no longer go on/off it only stays on. Because of the check engine light always staying on I have noticed that on many occasions my car will hiccup many times in a row. The only way to stop the hiccup I have noticed is to take my foot right of the gas for approx. 2-3 sec then car will continue without hiccup(till it happends all over again). All in all I have been having this problem now for approx. 1 year and if there is somehow someway it could be repaired I would appretiate it.
Posted on Nov 06, 2009
Tips for a great answer:
Aug 21, 2014 | 2005 Chrysler 300
Jul 09, 2017 | Cars & Trucks
Jul 19, 2013 | Cars & Trucks
Jan 27, 2013 | Cars & Trucks
Sep 24, 2012 | 2004 Honda Pilot
Aug 24, 2012 | 2002 Ford Taurus
First thing to check is turn
your key on and look for a amber light that say check engine. Make sure that
light come on and go out after about 3 to 15 sec with the key in on position. If
you don't have the light on the most likely your car computer do not get power
recheck the fuses and fusible link.
If you have the light on then
listen to the fuel pump running when you turn the car on, it should run for
about 3 sec. and turn off. If you don't hear the sound of the fuel pump then it
would be your fuel pump or relay. obd2 scanner tool
May 09, 2012 | Cars & Trucks
Jan 15, 2018 | 1994 Buick LeSabre
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: