What I have found is that it is the Hazzard Switch (the button with the red triangle on it) I have seen recalls but not for the 2002 model. One fix is to place a piece of paper (some what thick) inbetween the hazard button and the AC vent, so that you are placing pressure toward the hazzard swith.
SOURCE: 1985 190E
ok I went through everything I can find and Then ran across a post about the Hazzard switch....Sure enough that was it.
3,056 views
Usually answered in minutes!
my turn signal didnt work with the stick. but when i replaced a fuse the blinkers came back on and the a/c that i thought didnt work at all came on but the fuse keeps blowing. what to do about it?
I changed the left front turn signal lamp. Turn signals seemed to work until headlights turned on. With headlamps on, left side signal remains on bright and will not flash. Turn the headlamps off, and the turn signals work as normal. Also, hazard lights will not flash if the headlamps on. Replaced the signal flasher and no help. Any ideas?
how do i remove the front cover to replace turn signal lamps
I replaced the left front signal light but the left signal lights will not flash- tried the hazard lights- left signals still do not flash- they stay on. Right side works ok. When headlights are on the problem is the same-stay on and no flashing.
My turn signals come on in the front but never blink. I have replaced half the **** under the hood to keep it running and spent countless in oil. Any advice?
everything works except the turn signals, would it be a ground problem?
Are the hazard lights working from the hazard switch?
×