My friend, you just have a ground problem. The window motors will not operate without a ground. The dome light will STAY on without a ground because the ground is connected when the doors are closed against the buttons in the door frame. Any time you have an electrical problem, ALWAYS check the body ground wire connections FIRST.
Yes it must be programmed.
SOURCE: electrical issues with a 1994
sounds like pickup coil issue found inside distributure sorry for spelling
SOURCE: 2000 jeep grand cherokee 4.0 liter engine timing belt replacement
If you have the same pulley arrangement that most 4.0 engines have that pulley is an idler not a tensioner. Your power steering pump has a pivot bolt, and a slide under the pump. You adjust belt tension using the pump.
SOURCE: All Windows stopped working on Jeep Grand Cherokee
I had the same problem with my windows all of a sudden stop working. With a little searching and a 4 dollar part I fixed the problem myself in less than 5 minutes This one worked for me!
Click on the link below for the diagram and quick fix.
http://www.wjjeeps.com/misc/power_dist_ctr_02.jpg
SOURCE: 1996 Jeep Cherokee electrical schematics and 1998 jeep cherokee
I need the bulb for the roof light for the 1996 Cherokee
SOURCE: 2004 JEEP GRAND CHEROKEE ELECTRICAL PROBLEM
take the black boot off that is on the drivers side door and check to make sure all your wires are connected and working properly, one of ours was messed up causing us to have the same problem!
157 views
Usually answered in minutes!
×