1993 Ford Ranger SuperCab Logo

Related Topics:

A
Anonymous Posted on Oct 13, 2012

Remove Radio 1993 Ford Ranger

R&R Radio

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Aug 08, 2008

SOURCE: how to remove a 2001 ford ranger radio

If you are still having problems removing the stereo box from the dash, remove the two cap-head screws located above the AC controls/below the stereo control panel and give the top and bottom of the panel a gentle tug and you'll be able to remove the entire dash panel with the stereo enclosure installed. Retainer pins located behind the panel hold it in place to the dashboard assembly. My OEM 6-disc CD unit finally started to malfunction, indicating that all 6 slots are full when there are actually no slots filled. Can't load a CD nor can I convince it that the ghost CDs can be ejected. Its time for an aftermarket replacement/upgrade.

Ad

Anonymous

  • 1 Answer
  • Posted on Oct 23, 2008

SOURCE: 1993 ford ranger supercab

the fuse box is inside the pickup under the drivers side dash, there is a flasher which is the round one in the fuse box, it controls turn signals and emergency flashers also in the same fuse box, there is a 15 amp fuse which controls just the turn signals it sits vertical instead of horizontal.

Anonymous

  • 20 Answers
  • Posted on Feb 24, 2009

SOURCE: removing a radio from 1993 ford 150

If it is like my '95 and '96 then you will need the DIN removal tool.
Should have 2 small square holes on either side. If it is an after-market device you would need the instructions for the device.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Sep 18, 2009

SOURCE: how to remove radio from 2008 ford ranger wildtrak

it is very easy, but u need a special tool kit to release the spring clips that retain the radio in the dash, most autop parts stores like NAPA and Carquest have this tool kit, about $5

Anonymous

  • 1129 Answers
  • Posted on Feb 24, 2010

SOURCE: 1993 ranger sputters until warm?

replace the Oxygen senson before catalytic converter this sensor tells the computer to send signal to fuel injectors to allow rich mixture upon start up for warm up then leans out mixture as it heats.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

After disconnecting battery my car radio asks for code. Ford Ranger made in Thailand. Radio model 18D827

The correct radio SERIAL NUMBER is required for a code

It usually begins with M or V followed by SIX digits ...such as M654321 or V654321

Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing

Radio removal instructions can be found here..... or search YouTube for a video

www.fitaudio.com/index.php?CategoryID=13
Extractors are available on Ebay .... cheap !
-----------------------------------------------

Radio Codes and free advice are always available here

www.ukbookshelf.co.uk

Mention FixYa Forum

______________________________________
Ford M Serial Number radio codes available24/7....with no waiting

www.radio-codes.webs.com
______________________________________
0helpful
2answers
0helpful
1answer

How do you remove an automatic transmission from a 1993 ford ranger xl?

disconnect the universal joint remove the drive shaft remove crossmember put jack under ****** remove bolts holding it and then just pull it out
0helpful
1answer

Car Wont Start It May be the Starter Where is it on a Ford Ranger 1993 Xlt I had a Mechanic Hit it But I Dont Know Where or How

the radio turns on and thats about it. I thought it was the battery because it won't turn over but there is a little bit of juice in the battery.
0helpful
1answer

HOW TO INSTALL CAM SENSER ON 1993 FORD RANGER 4.0

its right behind the intake manifold. its a B*&^h to get off but you need a special tool you can get a most auto part stores. you have to make sure your #1 piston is TDC on your compression stroke. then drop in your sensor, align it to what your specs say
1helpful
1answer

Spit and sputter on highway

I'd spend the money to change plugs & wires & cap & rotor, if you that style ignition.
2helpful
2answers

1993 ford ranger supercab

the fuse box is inside the pickup under the drivers side dash, there is a flasher which is the round one in the fuse box, it controls turn signals and emergency flashers also in the same fuse box, there is a 15 amp fuse which controls just the turn signals it sits vertical instead of horizontal.
Not finding what you are looking for?

222 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...