03 wrangler, manual trans, 4.0l engine. wont start. gauges work, radio works, lights are good. turn key and get nothing. swapped starter relay w/good one. checked all fuses in fuse box under hood, and fuse box behind glove box, battery cable terminals are secure and corrosion free, connectors/wires at starter are secured, banged on starter solenoiod. still no start.
A problem on the ignotion?
____________-
wifi obd tool for ipad iphone
SOURCE: engine will not turnover
If there is no power coming IN to the starter relay - the ignition module has failed.
Replace the Ignition.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
SOURCE: 1989 Jeep Cherokee - Electrical Problem - horn, brake lights, blinkers, radio/cd...
There could be a fusible link under the hood off the starter relay that is burnt out.
SOURCE: 1989 Jeep Cherokee - Electrical Problem - horn, brake lights, blinkers, radio/cd...
I think I have found the problem. When I wiggle the ignition switch the turn signals and radio go on and off so I feel the issue is in the ignition switch. From what I understand the actual electronics for the switch are at the base of the sterring column behind the lower dash panel and is connected by a rod that may need adjusting.
457 views
Usually answered in minutes!
×