Hi,i am nazmi from malaysia,i'm driving the jeep cherokee 2.5 sport,my problem is when i'm driving my jeep,the timing belt was loose and the pulley also get loose,then the 'GEN' light is turn on,i've change my timing belt for twice in a month.the 1st timing belt was totally damage.
1.Your engine has an internal timing chain, not a belt.
Therefore I'm going to assume that you mean the serpentine drive belt.
Common causes for belt to fail is either a mis-aligned or damaged pulley, improper belt tension, or bad tensioner spring (if equipped with spring loaded tensioner) You mentioned a loose pulley but didn't say which one! That's what I'd look at first! Also, make sure that all pulleys have no "wobble" indicating a bad pulley bearing Most common: water pump or idler pulley.
322 views
Usually answered in minutes!
ok,tq..i did't know what was the pulley name but it look like it was big than other pulley around it.i'll check and take a look for the aligment of the pulley.tq.
i've 2nd question to ask about my air cond.my air cond will feel cold only when my car was move,but when it on static,it just only feel the fan air come out from it.tq
×