High beam, drivers side works , don`t work on low beam
Sounds like filament is burned out. Check bulb.
Check tour bulbs first and replace if blown. If OK then check wiring backwards from light to dip switch.
SOURCE: Ford 2003 Focus. Low beam headlights not working.
REPLACE MULTI SWITCH ON COLUM (STEERING) ON LEFT SIDE. bUY NEW ONE FIRST AND LOOK AT OLD AND SIMPLER TO CHANGE
SOURCE: 2008 Ford F-250 Low beams do not work. High beams are fine.
just remove all the connections as it could be malfunction in the switches and the wirings needs to be rechecked to make it proper.other option could be bad dimmer switch. You will need to replace the turn signal/ dimmer switch as an assembly.to replace you will need to disable the air bag, drop the column, pull the wheel
SOURCE: My low beams work on my headlights but my High beams wont come on
Take a look at this link regarding DRL system. I know it's not exact truck but most of it would apply to yours too. It should give you hints on what to test & how.
http://www.fordf150.net/howto/drl.php
SOURCE: high beams wont turn on.
First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill
SOURCE: 2001 Ford Focus - High beam / low beam problem with headlights
just replace the dimmer switch under the column its wore out on the low beam side
Testimonial: "It's great to know that there's not a whole lot more to check! I wouldn't have guessed I was so close. Thanks!"
ORIGINAL ENGINE MANAGEMENT Part # DR1067 Cost $101,967 views
Usually answered in minutes!
×