SOURCE: 96 Dodge Avenger...replacing headlights!!
you have to unscrew the round white houseing on the back of the head light assembly and then reach inside the headlight and pull the clip out then the bulb and wires come right out i know its a pain in the a#@ to get your hand in there but your only other choice is take the whole headlight assembly out and that is an even bigger project also the clip holding it in is kinda like a U clip and the bottom is attached so dont pull it out completly it kinda justs pivits itself out of your way
SOURCE: How to replace fog lights on 1998 Dodge Avenger ES
you need to take off the buttom shields and then you should be able to get to the fog lights
SOURCE: Replace Bulbs in Headlight. 2008 Dodge Avenger
there is 2 bolts on top 1 top outer and 1 top front behind grill, u need to remove the top center black cover and 1 bottom side outer need to remove the inner finder liner to get to the 3rd bolt.
hope that helps, it is stupid
SOURCE: How to change a headlight bulb on a 1999 dodge avenger?
under the hood in behind the head light is where the bulb goes dont touch the glass on your new bulb
SOURCE: How hard is it to replace the water pump on a 1997
The pump is driven by the timing belt so you basically need to take the front of the motor apart. It is quite a job to get at it but is doable. If you are going to do the job I'd suggest changing the timing belt, tensioner pulleys and the cam and crankshaft seals as well, may as well do some preventative maintenance while it is apart. I've got the whole proceedure and will make u a copy if you want.
83 views
Usually answered in minutes!
×