Dear sir;
Yesterday my jeep started and ran then this morning it won't.
There is plenty of charge on the battery,but when i turn the key there is nothing.There isn't even a clicking sound like starter selenoid.I did find a starter relayin the fuse box under the hood.Any help on where to start looking for the problem would be greatly appreciated.
Thank you for your time
Al
Put on new battery and starter on 1998 jeep wrangle 6 cylinder...turn switch and nothing but clicking noise..any suggestions!
My 98 Wrangler did the exact same thing. Odd as it sounds, check the battery cables and thoroughly clean any corrosion. I was told by a Jeep mechanic, that the alternator sends out a full charge to the battery and basically the electrical system overloads, and the Jeep won't start.
This is basic, but first off, try to shift it into neutral, and try to start it. It is easy for the linkage to get out of adjustment, where it thinks the jeep is in gear. If that does not work, make sure you have battery power to the ignition and starter.
516 views
Usually answered in minutes!
×