Engine code for 1.2 ecotec engine 16 v
SOURCE: 2.2 ecotec engine. Code says random misfire. What
did you fix it? if you did what did you do? i have the same prblm thanks!
SOURCE: corsa head torque settings?
for 4ee1
cylinder head
stage 1: 40Nm
stage 2: 60° - 75°
stage 3: 60 - 75°
let me know if u need any more of those
take care
SOURCE: reverse lights on my vauxhal corsa v reg are not working
Yes. You can get the MOT station to do the repair or you can try and solve the problem. Check your fuses, the earth connections, your wiring and the voltage at the bulb. It could also be a faulty switch. I hope some of that will help.
SOURCE: how do i fix the thermometer in my vauxhall corsa
that is not your thermostat, that has to be the temp sensor on your cylinder head, should be next to the intake manifold on the head. it has 1 cable. that sensor´s only job is to show you the temp of the engine on the temp dial in your instrument display
the thermostat is connected to a water hose that goes to your radiator, its also on the cyinder head, but thermostats are only mechanical doors regulated by temperature that allow hot water from the engine go cool down on the radiator.
let me know
SOURCE: Vauxhall Corsa brake pads
lift car
take the wheel off
the caliper off, the screw is right behind the side ur gonna have in front of you,
after u take that screw off the pads will be free to take off,
replace,
check the piston of the caliper and check for the conditions of all the rubber that is on the caliper, replace if needed
screw it back and put the wheel back to its place
hope this helps
830 views
Usually answered in minutes!
×