Blend door actuator
SOURCE: blend door actuator needs replacing does the
no it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa
SOURCE: cant find the blend door actuator on 2003 ford f150 super crew
The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.
SOURCE: how to replace blend door actuator in a ford
I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.
Fig. Remove the floor air outlet duct extension (1) from the floor duct (2)
Disconnect the electrical connection at the blend door actuator (#10 in pic below).
Fig. Blend door actuator and related components
Remove the blend door actuator mounting screws from the HVAC module.
Remove the blend door actuator as an assembly with the actuator cam.
Fig. Remove the blend door actuator mounting screws from the HVAC module
To install:
Picture of actuator:
5,733 views
Usually answered in minutes!
×