SOURCE: '98 mazda mpv, bottom alternator
no shortcut, had to take pulley off. It was'nt that bg a deal, just secure pulley so it won't turn while loosening. If the pulley had been 1/8th of an inch smaller in diameter, lower bolt would have came right out. Some engineer probably got a hell of a christmas bonus for that engineering marvel!!!
Thanks alot anyway,
TRussrod
SOURCE: 91 mazda gtx
On a mazda gtx (4x4 turbo) 1840cc
oil bolts and tighten in 3 even stages
30 ft lbs or 60nm
40 ft lbs or 70nm
60 ft lbs or 81nm
torque sequence is:
inlet side
8 4 2 5 9
10 6 1 3 7
exaust side
SOURCE: 94 mazda B3000 3.0L cylinder head torque specs
Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds
Use torque sequence below
SOURCE: my 91 mazda mpv 4x4 van won't start. we were
than I would have the fuel pressure check and change the fuel filter
89 views
Usually answered in minutes!
×