Alarm
Inset the key into the driver door and turn to unlock position three times to disengage alarm system without remote. Do the same in lock position for setting alarm without key fob.
SOURCE: 1995 jeep grand cherokee,i want
the security module is located behind the dash trim at the glove box. remove glove box door, and top crash pad, and trim around glove box door. The security module is mounted behind the trim panel. Unplug it and it bypassed.
SOURCE: can not disarm alarm on 1997 jeep grand cherokee
This seems to be a common problem with this body style Grand Cherokee. There are 3 ways to disarm the alarm system on this vehicle. You have to unlock the drivers door with the key, unlock the rear liftgate with the key or unlock the vehicle using the keyless entry remote. If none of these three things disarm your system then your problem is most likely the security system module itself. The module is red and located behind the dash on the 92 - 95 model Grand Cherokees. The Dash was redesigned in 1996 for dual airbags and a more streamline appearance. On the 96 - 98 models, I am not sure where this module is located.
SOURCE: 1997 jeep grand cherokee alarm going off at night
You may have left a door half open, or have a bad door switch. Until you find out what the problem is you can manually push your door locks with your hand to lock them without arming the alarm and still have your vehicle locked, and not have to worry bout hte alarm.
Testimonial: "Thanks a lot. Feel safer knowing how to lock up car without alarm going off. Will also look into whether I have a bad door switch."
SOURCE: I don't want an alarm on it anymore. Is there any
look for a green wire with orange stripe in drivers kick panel permanently ground to bypass factory alarm
10,576 views
Usually answered in minutes!
×