SOURCE: need to know how to bleed it
There would be a bleed nipple on it. It would be located near the bellhousing.
Open nipple a little let fluod seep out until no bubbles in it. Make sure you top the fluid up and dont let it empty.
SOURCE: Brake Master Cylinder Push Rod Clearance
No Adjustment.Rod is made into booster,there's a short rod between master cyclinder and booster but not adjustable!!
SOURCE: I have a 1999 Saturn Sl 5 speed manual
check for leaks on master cylinder if you haft to add brake fluid its definately leaking,throw out bearing maybe going out?may of glazed pressure plate? good luck!!
SOURCE: I HAVE A 1999 SATURN SL PUT NEW CLUTCH IN AND A
Are you certain you or your mechanic installed the clutch plate facing the right direction? It is usually marked on one side to tell you which way to face it. I have personally done this and had the same issue, if the hub portion of the plate is rubbing on the flywheel it won't kick out or in all the way, and if left it can cause damage to the flywheel.
Good luck.
Are you certain you or your mechanic installed the clutch plate facing the right direction? It is usually marked on one side to tell you which way to face it. I have personally done this and had the same issue, if the hub portion of the plate is rubbing on the flywheel it won't kick out or in all the way, and if left it can cause damage to the flywheel.
Good luck.
SOURCE: How do replace a master cylinder for the clutch on
I think the best method is to buy the entire master/slave unit which comes prebled. I have seen them for sale on ebay, but you can also get them at autozone and advance. Basically the same unit fits all SL-series.
73 views
Usually answered in minutes!
×