Highbeams stay on even after key is removed. how do i fix?
SOURCE: How do I remove the filter on my saturn l300, all it wants to do is turn, but not come off
This may sound stupid, but I will ask anyway.... did you "pull" on it after you loosened it? Been there...
SOURCE: 2002 Saturn L300 High Beam Problems
u are going to have to replace the turn signal switch to correct this.
SOURCE: I need a diagram to fix serpentine belt for 2004
IF THERE IS NOT A DIAGRAM UNDER THE HOOD ANY LOCAL AUTOPART STORE SHOULD B ABLE TO PROVIDE ONE 4 U, TRY AUTOZONE OR NAPA THIS SERVICE IS FREE
If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_00678fd4800d19c5
SOURCE: I need to replace the crank sensor on a 2004
If you lay on your back and slide under the front bumper just past the radiator you will see the oil filter housing. It is on the block next to the filter housing on the right side That is where it is on my 2003 l300.
SOURCE: 2004 saturn l300 heater fan motor cuts in and out
Check connections to the fan speed resistor module for looseness, and the resistor module itself for heat damage or intermittency.
The resistor module is in the heater fan ducting in the fan airflow.
Alternatively, the fan motor may be faulty (or have worn brushes)- apply power directly to the motor supply connections to ensure it runs ok.
114 views
Usually answered in minutes!
×