1992 Jeep Wrangler Logo
Posted on Dec 06, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

5th. Gear Was on road trip had all 5 gears stopped for coffee lost 5 gear but still works great 1-4 1992 jeep wrangler 4x4 5 speed manual transmission. 1st through 4th gears not a problem. Put it in 5th but it doesn't feel engaged. Gas it, motor revs, terrible grinding sound from tranny, and no power to wheels.

  • Anonymous Mar 12, 2014

    Suzuki Aerio 5sp manual makes a rasping noise when accelerating in 4th and 5th gears or when engine under load. Worse in 5th gear than in 4th. Stops on lifting off gas and cruising on level road.

  • Anonymous Mar 28, 2014

    Lack of power at high speed

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 508 Answers
  • Posted on Feb 16, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Jan 24, 2009
Answers
508
Questions
1
Helped
213841
Points
1378

Sounds like you may have bent a shift fork or your cluster gear has some missing teeth on it now. I would venture to say that is it a bent shift fork. This will require the transmission be removed to gain access to inspect and repair.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Lost speed.5th gear stoped working

old car. 5th gear? is this M/T? 1987 ?
A/T? is 4speed

what does stopped working mean .
1: shifter fails to select 5 gear H pattern slot.
2: grinds?
3: cant force it to 5th with clutch depressed.? is free play at spec?
4: raise front wheels off ground, can you get in to 5th now? keyout and running?
5: can you get into 5th parked engine off, and select 5th and then start car in 5th with clutch depresses first step. then slowly very slowly attempt to move car starting in 5th, but dont finish, just feel the gear, feel that its there and not neutral.

not working ,says nothing at all.
0helpful
1answer
0helpful
1answer

I had my 5 speed. Dodge ram 3500 transmission rebuilt 15000 miles ago and I lost doth gear again need an estimate to get it fixed again

what gear? if its the 5th in the nv4500 there is only one fix, none of the others work! there is a new shaft from quad 4x4 that is a after market gear assembly that will be the last time ever 5th gear comes off guaranteed . about $2800 up to do
0helpful
1answer

Making noise like gear is rubbing something in 5th gear only. It starts & stops with every gear rotation

Drain the oil out of your manual tranny into a CLEAN bucket. Run your fingers through it. Does it look like you've got splotches of silver paint? If so, your tranny's bearings and/or gears may be wearing out.
0helpful
2answers

When driving in 5th gear should the RPMs run at 3000 RMPS. Mine is a 4 cly 5 speed

You don't provide much information to go on (type of vehicle, type of engine, 2wd or 4wd, etc.) RPM is always going to be based on the speed you're traveling with a standard transmission. My 4 cyl 5 speed Nissan pickup in 5th gear runs at 3000 RPM at about 75mph.
0helpful
1answer

Manual transmission grinds/crackles in 5th gear

The syncronizers and blocker ring are damaged some stores like auto zone have a super synthetic gear lube I had this problem in my 95 wrangler and the problem went away. Its going to be hard to find tranny parts for that car I just put a new tranny in from the junk yard with 70k miles for $200 its in perfect operating condition.
0helpful
1answer

1998 jeep wrangler

shift tranny from 1st-3rd if engine revs up clutch needs replacing
0helpful
1answer

Manual Trans Problem

you should of stopped and picked it up. just kidding! do you mean it wont go into gear or when it is in gear nothing happens
0helpful
1answer

5th. Gear

transmission is on its way out and will need to be rebuilt drive it as long as you can live without 5 gear.
Not finding what you are looking for?

1,001 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...