At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Well, that much I know, but thanks anyway. Was changing the oil today and found the pre-cat one hiding near the filter behind the panel...
Well, that much I know, but thanks anyway. Was changing the oil today and found the pre-cat one hiding near the filter behind the panel...
AnonymousMar 13, 2014
1997 subaru legacy outback relay switch for turn signals1997 subaru legacy outback relay switch for turn signals
AnonymousMar 16, 2014
where is the location of downstream 02 sensor connector? is it under the passanger side seat?where is the location of downstream 02 sensor connector? is it under the passanger side seat?
AnonymousMar 17, 2014
SUBARU LEGACY GT MAKING **** NOISESSUBARU LEGACY GT MAKING **** NOISES
AnonymousMar 22, 2014
its a 2.5i standard no turbo or anything. My local subaru service center says its a screw on filter located on the side of the transmission. Is there a picture diagram of where this is located exactlyits a 2.5i standard no turbo or anything. My local subaru service center says its a screw on filter located on the side of the transmission. Is there a picture diagram of where this is located exactly
AnonymousMar 25, 2014
Pulled a p0340 code today on my 2005 subaru legacy gt Where exactly are my cam shaft sensors located at?Pulled a p0340 code today on my 2005 subaru legacy gt Where exactly are my cam shaft sensors located at?
AnonymousMar 26, 2014
19991999
AnonymousMar 26, 2014
replacing the air/fuel sensor bank 1 on 2005 subaru legacyreplacing the air/fuel sensor bank 1 on 2005 subaru legacy
AnonymousMar 28, 2014
Can not remove the license plate bulbsCan not remove the license plate bulbs
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The 2005 Jeep Grand Cherokee Laredo 3.7L typically has two oxygen (O2) sensors. One is located upstream (before the catalytic converter), often referred to as the pre-cat or upstream sensor, and the other is located downstream (after the catalytic converter), known as the post-cat or downstream sensor. In many cases, the upstream and downstream sensors are not the same and serve different purposes in monitoring and optimizing the air-fuel mixture and emissions.
since that is a Boxer engine it will have one O2 sensor at the base of each exhaust manifold. and since it is newer than a 1996 it will have one or two more O2 sensors behind each catalytic converter so you will have three or four ( O2 sensors) fuel air ratio sensors you need to check if you are having a problem. the two at each exhaust manifold are the upstream and the ones at the catalytic converters are the downstream. hopefully that engine only has one catalytic converter going into one exhaust pipe. the exaust manifolds are under the engines cylinder heads (under the engine).
There are two oxygen sensors: one is upstream of the catalytic converter and one downstream of the catalytic converter. The oxygen sensor, or O2 sensor is usually located near the catalytic converter.Oxygen sensor downstream of the catalytic converter in the exhaust system on the back of the engine.-------Thanks.Helpmech
Downstream O2 sensor is after (downstream) the catalitic converter on the exhaust pipe. Upstream O2 sensor is after (downstream) the engine exhaust manifold - before (upstream) the catalitic converter. Upstream O2 sensor controls air-to-fuel ratio to yield a small excess oxygen. Downstream O2 sensor assesses the catalitic converter performance.
the 1996 grand only used 2 02 sensors on the 2 engine options.....the 5.2 v8 sensors are located 1 just in front of the convertor and the downstream is in the convertor....the 4.0l the downstream is in the convertor and the upstream is located in the exhaust manifold right under the intake manifold.
Well, that much I know, but thanks anyway. Was changing the oil today and found the pre-cat one hiding near the filter behind the panel...
1997 subaru legacy outback relay switch for turn signals
where is the location of downstream 02 sensor connector? is it under the passanger side seat?
SUBARU LEGACY GT MAKING **** NOISES
its a 2.5i standard no turbo or anything. My local subaru service center says its a screw on filter located on the side of the transmission. Is there a picture diagram of where this is located exactly
Pulled a p0340 code today on my 2005 subaru legacy gt Where exactly are my cam shaft sensors located at?
1999
replacing the air/fuel sensor bank 1 on 2005 subaru legacy
Can not remove the license plate bulbs
×